E.1. ARCHIVAL PUBLICATIONS 1. Hobson, G. V., Ganaim Rickel, H. J. and Williams, A. J. H., "Laser-Doppler Velocimetry and Flow Visualization of Flow Through a Compressor Cascade at Stall," Journal of Turbomachinery, Vol. 120, No. 1, pp 170-178, Jan. 1998. 2. Hobson, G. V., Wakefield, B. E., and Roberts, W. B., "Leading-Edge Turbulence Amplification in a Compressor Cascade," Accepted for publication in the Journal of Rotating Machinery. 3. Hobson, G.V. and Dober, D.M., "Three-Dimensional Fiber-Optics LDV Measurements in the Endwall Region of a Linear Cascade of Controlled-Diffusion Stator Blades," International Journal of Turbo and Jet Engines, Vol. 14, No. 1, 1997. 4. Chapter 17; Advances in Turbomachinery Fluid Dynamics and Heat Transfer; Hobson, G.V., "Laser-Doppler Velocimetry and Flow Visualization of Flow Through a Controlled-Diffusion Compressor Cascade at Stall," Marcel Dekker, 1996. 5. Kaul, U.K. and Shreeve, R.P., "Full Viscous Modeling in Generalized Coordinates of Heat Conducting Flows in Rotating Systems", Journal of Thermophysics and Heat Transfer, Vol. 10, No. 4, p. 621-626, Oct-Dec 1996. 6. Moyle, I.N., Shreeve, R.P. and Walker, G.J., "Case Wall Pressures in a Multistage Axial Compressor with Tip Clearance Variation", Journal of Propulsion and Power, Vol. 12, No. 5, p. 967-973, Sept-Oct 1996. 7. *Sanger, N.L., "Design of a Low Aspect Ratio Transonic Compressor Stage Using CFD Techniques, Journal of Turbomachinery, Vol. 118, p. 479-491, July 1996. (*NASA Lewis Research Center) 8. Brawley, S. and Hobson, G.V., "Aerodynamic Design Using Parallel Processors," AIAA Journal of Aircraft, Vol. 33, No. 3, pp. 630-632, May-June, 1996. 9. Hobson, G.V., "A Navier-Stokes Analysis of a Controlled- Diffusion Compressor Cascade at Increasing Incidence," International Journal of Turbo and Jet Engines, December 1995. 10. Hobson, G.V., and Shreeve, R.P., "Inlet Turbulence Distortion and Viscous Flow Development in a Controlled-Diffusion Compressor Cascade at Very High Incidence," AIAA Journal of Propulsion and Power, Vol. 9, No. 3, pp. 397-404, May-June 1993. 11. Hobson, G.V. and Lakshminarayana, B., "Fully Elliptic Incompressible Flow Calculations on a Regular Grid," AIAA Journal, Vol. 30, No. 11, pp. 2783-2785, Nov. 1992. 12. Moyle, I.N., Walker, G.W. and Shreeve, R.P., "Stator-Averaged, Rotor Blade-to-Blade Near-Wall Flow in a Multistage Axial Compressor with Tip Clearance Variation", Transactions of the ASME, Journal of Turbomachinery, Vol. 114, No. 3, July 1992, pp. 668-674. 13. Hobson, G.V. and Lakshminarayana, B., "Prediction of Cascade Performance Using an Incompressible Navier-Stokes Technique," ASME Journal of Turbomachinery, October 1991, Vol. 113, pp. 561-572. 14. Shreeve, R.P., Elazar, Y., Dreon, J.W. and Baydar, A., "Wake Measurements and Loss Evaluation in a Controlled-Diffusion Compressor Cascade", Transactions of the ASME, Journal of Turbomachinery, Vol. 113, No. 4, Oct 1991, pp. 591-599. 15. Elazar, Y. and Shreeve, R.P., "Viscous Flow in a Controlled Diffusion Compressor Cascade with Increasing Incidence," Transactions of the ASME, Journal of Turbomachinery, Vol. 112, No. 2, pp. 256-266, April 1990. 16. Walker, G., "Turbulent Skin Friction on Axial Compressor Blading," AIAA Journal, Vol. 28, No. 7, pp. 1201-1202, July 1990. 17. Walker, G., "Transitional Flow on Axial Turbomachine Blading," AIAA Journal, Vol. 27, No. 5, pp. 595-602, May 1989. 18. Eidelman, S., "Gradual Opening of Skewed Passages in Wave Rotors," AIAA Journal of Propulsion and Power, Vol. 2, No. 4, pp. 379-381, July-August 1986. 19. Sanger, N.L. and Shreeve, R.P., "Comparison of Calculated and Experimental Cascade Performance for Controlled-Diffusion Compressor Stator Blading," Transactions of the ASME, Journal of Turbomachinery, Vol. 108, No. 1, pp. 42-50, July 1986. 20. Moses, H.L. and Thomason, S.B., "An Approximation for Fully Stalled Cascades," AIAA Journal of Propulsion and Power, Vol. 2, No. 2, pp. 188-189, March-April 1986. 21. Eidelman S., "The Problem of Gradual Opening in Wave Rotor Passages," AIAA Journal of Propulsion and Power, Vol. 1, No. 1, January-February 1985. 22. Eidelman, S., Colella, P. and Shreeve, R.P., "Application of the Godunov Method and Its Second Order Extension to Cascade Flow Modeling," AIAA Journal, Vol. 22, No. 11, pp. 1609-1615, November 1984. 23. Eidelman, S., Mathur, A., Shreeve, R.P. and Erwin, J., "Application of Riemann Problem Solvers to Wave Machine Design," AIAA Journal, Vol. 22, No. 7, pp. 1010-1012, July 1984. 24. Shreeve, R.P. and Neuhoff F., "Measurements of the Flow From a Compressor Rotor Using a Dual Probe Digital Sampling (DPDS) Technique," ASME Journal of Engineering for Gas Turbines and Power, Vol. 106, No. 2, pp. 366-375, April 1984. 25. Eidelman, S., "A Method of Calculation of the Critical Energy for Direct Initiation of Unconfined Detonation," Combustion Science and Technology, Vol. 30, pp. 133-144, 1983. 26. Peacock, R.E., "A Review of Turbomachinery Tip Gap Effects: Part 2; Rotating Machinery," International Journal of Heat and Fluid Flow, Vol. 4, No. 1, pp. 3-16, March 1983. 27. Peacock, R.E., "A Review of Turbomachinery Tip Gap Effects: Part 1; Cascades," International Journal of Heat and Fluid Flow, Vol. 3, No. 4, pp. 185-194, December 1982. 28. Shreeve, R.P. and Oates, G.C., "A Survey on Air-Breathing Propulsion Education," Astronautics and Aeronautics, pp. 114-119 and 129, December 1980. 29. Adler, D., "Status of Centrifugal Impeller Internal Aerodynamics: Part II; Experiments and Influence of Viscosity," ASME Journal of Engineering for Power, Vol. 102, No. 3, pp. 738-746, July 1980. 30. Adler, D., "Status of Centrifugal Impeller Internal Aerodynamics: Part I; Inviscid Flow Prediction Methods," ASME Journal of Engineering for Power, Vol. 102, No. 3, July 1980. 31. Shreeve, R.P., McGuire, A.G. and Hammer, J.A., "Calibration of a Two Probe Synchronized Sampling Technique for Measuring Flows Behind Rotors," ICIASF '79 Record, IEEE Catalog No. 79CH1500-8AES, Proceedings of the International Congress on Instrumentation in Aerospace Simulation Facilities held at Monterey, California, September 1979. 32. Shreeve, R.P., Anderson, D.J. and Olson, J.A., "Velocity Vector Determination From Multiple-Sensor Pneumatic Probe Measurements," AIAA Journal, Vol. 15, No. 11, pp. 1539-1540, November 1977.